IOT

Hardware

[NodeMCU Lua ESP8266 ESP-12 WeMos D1 Mini WIFI 4M Bytes Development Board Module]

[Adafruit HUZZAH ESP8266]

Mode GPIO0 GPIO2 GPIO15

• Flash (démarrage normal: exécution du programme installé en Flash) 3.3v 3.3v GND
• UART (upload à partir de la liaison série) GND 3.3v GND
• SDIO (démarrage à partir d'une carde SD) peu importe peu importe 3.3v

IDE Arduino

Configuration

General

1. File -> Preferences -> Additional Boards Manager URLs : http://arduino.esp8266.com/stable/package_esp8266com_index.json
2. Tools -> Boards -> Boards Manager:
   1. Search for ESP8266
   2. Install Esp8266 by Esp8266 Community

NodeMCU Lua ESP8266 ESP-12 WeMos D1 Mini WIFI 4M Bytes

• Tools -> Boards -> "WeMos D1 R2 & Mini"
• CPU Frequency 80 Mhz
• Upload Speed -> 115200

Adafruit HUZZAH ESP8266 breakout

• Tools -> Boards -> "Adafruit HUZZAH ESP8266"
• CPU Frequency 80 Mhz
• Upload Speed -> 115200

Lolin NodeMcu v3

• Tools -> Boards -> "NodeMcu 1.0 (ESP-12E" Module)
• CPU Frequency 80 Mhz
• Upload Speed -> 115200

TRoubleShooting

sync

1. Try to load a new project